Loading...

Written Report GuidelinesDescription of the content of each of these sections follows. Additional remarks on report preparation and writing style are given at the end.

Title page:The course (ChE E 3810) The name of the principal author (write NONE if a principal author was not used) The names of the other group members The group number Abstract: The ABSTRACT is not a part of the body of the report itself.

Report structure - ntu

The abstract should very concisely summarize the whole report: why it was written, what was discovered or developed, and what is claimed to be the significance of the effort.

The abstract does not include figures or tables, and only the most significant numerical values or results should be given This is helpful when you need to provide information to a customer during order entry. You can generate reports to review customer and sales information..

Introduction: The INTRODUCTION should provide a clear statement of the problem posed by the project, and why the problem is of interest. If needed, the introduction also needs to present background information so that the reader can understand the significance of the problem. A brief summary of the unique approach your group used to solve the problem should be given, possibly also including a concise introduction to theory or concepts used later to analyze and to discuss the results.

Materials and Methods: The purpose of the MATERIALS AND METHODS section is to describe the materials, apparatus, and procedures used to carry out the measurements. Most importantly, the section needs to provide a clear presentation of how key measurements were obtained and how the measurements were analyzed.

This is where the particular approach followed to reach the project's objectives should be described. The detail should be sufficient so that the reader can easily understand what was done.

An accurate, schematic diagram depicting the apparatus should be included and referred to in the text as needed (if a diagram has been already provided it can be used in the report, provided that the source is properly referenced) When you are asked to write a report you will usually be given a report brief which provides you with structure material in a logical and coherent order;..

To improve clarity of presentation, this section may be further divided into subsections (ex.

For which reasons can companies report reviews? – trustpilot support

Results: The RESULTS section is dedicated to presenting the actual results (i.

measured and calculated quantities), not to discussing their meaning or intepretation.

The results should be summarized using appropriate Tables and Figures (graphs or schematics). Every Figure and Table should have a legend that describes concisely what is contained or shown.

Figure legends go below the figure, table legends above the table. Throughout the report, but especially in this section, pay attention to reporting numbers with an appropriate number of significant figures.

A formal error analysis (such as, perhaps, was done in Physics lab) is not necessary. Still, features of the data-taking and processing that may have especially contributed to errors should be pointed out. One classical example is the taking of small differences between large numbers; for instance, 11.

Another procedure that usually increases error is numerical differentiation. Discussion: The DISCUSSION interprets the results in light of the project's objectives.

The most important goal of the DISCUSSION section is to interpret the results so that the reader is informed of the insight or answers that the results provide. The DISCUSSION should also present an evaluation of the particular approach taken by the group.

For example: Based on the results, how could the experimental procedure be improved? What additional, future work may be warranted? What recommendations can be drawn? Conclusions: The CONCLUSIONS should summarize the central points made in the Discussion section, reinforcing for the reader the value and implications of the work. If the results were not definitive, specific future work that may be needed can be (briefly) described.

The conclusions should never contain "surprises". Therefore, any conclusions should be based on observations and data already discussed. It is considered extremely bad form to introduce new data in the conclusions.

References: The REFERENCES section should contain complete citations following standard form The written report should have the following sections: (1). Title page (2). References must be numbered in the order that they are cited. It is good practice to .

Structure of the report - unilearning - uow

One good format to follow is that used in the Chemical Engineering Progress journal, published by AIChE. The references should be numbered and listed in the order they were cited in the body of the report.

In the text of the report, a particular reference can be cited by using a numerical superscript that corresponds to its number in the reference list. If a reference has not been actually consulted, it should be listed "as discussed in name of the work that discussed the reference ".

Additional Remarks:Writing StyleReports should be as long as they need to be -- no longer. Brevity is desirable, provided the necessary information is properly communicated.

Some suggestions: Avoid reproducing standard information, for example, calibration curves. Avoid appendices unless there is a specific reason for them.

Consider each sentence - does it meaningfully contribute to the report?The reports should consider the background of the fictitious person described in the project scenario. The quality of the report can suffer both from overly detailed as well as too incomplete descriptions. Only the title page, the abstract, the introduction, and the references should start on a separate page; the other sections should not.

However, a heading needs to indicate the beginning of each section.

Work with customer and sales information - oracle help center

While scientific writing does not have to be elegant, it must be precise.

To state "The data were plotted and seemed to agree with the theory The title of the report should be introduced as a subject line. The bibliography lists, in alphabetical order, all published resources used in the compilation of .

To state that "The pressure drop across the column in inches of water was plotted on log-log coordinates as a function of air flow rate in cubic feet per minute.

The plot, shown in Figure 3, was close to linear and the slope of the best straight line, 1. Also, whenever possible, phrases such as "small", "large", "greater than", should be used in conjuction with the actual numbers.

A table or figure should never be inserted into the report without first referring to that table or figure in the text. Reference to a figure should include a brief description of what it contains and what it contributes to the point under consideration. Figures and tables should be merged into the text or placed on a separate page immediately following the first page on which they are mentioned; they should not be collected at the end of the report.

References must be numbered in the order that they are cited.

How to write a report - open polytechnic

The first of these protects against charges of plagiarism.

The second gains friends and shows a generous nature 11 Aug 2015 - Companies can select one or more reasons for reporting a review but placing an order or using a company's services can also be enough..

A uniform verb tense should be used throughout the report, preferably past tense.

as if giving directions or orders, should not be used. The purpose is to state what was done, not to tell other people what to do.

Since the reports are formal, the first person (singular "I" or plural "We") should not be used. Sentences should not start with "It" unless the object that "It" refers to is absolutely clear from the context. All text should be double-spaced to allow room for comments.

All pages, including figure pages, should be numbered consecutively A report may include any of the sections outlined in the table above, in the order presented. However, it is rare that it will include all of them. The revolving soccer .

Two or more short sentences should be used instead. An excellent way to improve style and grammar is to have others proofread the report.

Needlessly fancy presentation (bold, italic, or underlined fonts; color in text or figures) should be avoided unless it truly enhances the clarity of the report. FiguresFigures are categorized as either graphs or drawings.

Graphs should follow engineering standards, not Excel defaults. Style should be similar to that found in standard engineering textbooks. Grids should be appropriate to what the reader is likely to extract from the figure.

Type sizes for coordinates and legends should be appropriate: not too small, not too large. Arial) font works well for figure legends and coordinate labels.

All legends should be within the graph area, not beside it A brief (one paragraph) account of what the report contains including conclusion/recommendations. Do your summary last. List the contents in the order they .

Line thickness should be sufficient to provide for good visibility, but not heavier than necessary. Figures (drawings, schematics) should be kept simple.

Fancy art work and three-dimensional renditions can be distracting if used indiscriminately. Below every figure or graph should be a caption that concisely describes what is shown.

Figures and graphs should be numbered consecutively. TablesTables should be well organized, with unshaded backgrounds.

A table should not include columns that have all entries identical. As with Figures, a standard engineering textbook can be used as a guide to good table composition.

Tables should be numbered consecutively, and above each table should be a caption describing the table contents. Some Common Abbreviations Used in MarkingNC = not clear RW = rewrite RT = rethink, logic appears flawed or missing curly brackets = grader's comments Underline = see comments above underlined text Check mark = good